Viscount Prestige 40 Quick Start Manual Download Page 20 | Manualshive

Page: 20 / 24

background image

18

Viscount - Quick Guide

Prestige 40

5.2 PLAYING BACK A PERFORMANCE

To play back a track recorded using the sequencer, insert the floppy disk in the drive and press
[PLAY]. The system will proceed to read the floppy disk:

*** Reading disk contents ***

Please wait

after which all the tracks (.MID files) saved on the disk will be displayed:

ERICSONG.MID SESSION1.MID RECORD_1.MID

RECORD_2.MID RECORD_3.MID

Use the [CURSOR] keys to select the song you wish to play and press [ENTER]. The display will
show the page:

PLAY:SESSION1

Tempo:120

Meas:

1

Ped:---

Great:PLY

Swell:PLY

Comm:PLY

Press [START-STOP] to start playing back the file.
While the track is playing back the voices can also be changed and it is possible to play along with
the sequencer.
Playback can be paused temporarily using the [PLAY] button.

PLAY:SESSION1

Tempo:120

Meas:

12

Ped:PSE

Great:PSE

Swell:PSE

Comm:PSE

press [PLAY] again to continue.

To stop the playback, press [START-STOP] again; press [EXIT] or [PLAY] to exit the sequencer
and return to the main menu.

«
...
18
19
20
21
22
...
»

Summary of Contents for Prestige 40

























Reviews:

No comments

Related manuals for Prestige 40

Brand: Kawai Pages: 2

Brand: 3M Pages: 2

Brand: 3M Pages: 16

Brand: Badger Meter Pages: 12

Brand: Badger Meter Pages: 16

Brand: Badger Meter Pages: 56

ModMAG M Series

Brand: Badger Meter Pages: 4

Brand: Omicron Lab Pages: 33

Brand: Omicron Lab Pages: 21

Brand: Omicron Lab Pages: 22

Brand: Vectornav Pages: 114

Brand: Omega Pages: 74

Brand: Omega Pages: 24

Vortex Flow Industry

Brand: Grundfos Pages: 16

Brand: Spacelabs Pages: 156

Smart Probes 115i

Brand: TESTO Pages: 17

Frontline 802.11

Brand: Teledyne Lecroy Pages: 223

Brand: ESP Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands