Viscount Legend '70s Artist, User Manual

Page: 17 / 146

EN - 15
Legend ‘70s – User Manual
Front panel
Part selection buttons.
As described in the introduction, this module is comprised of two different parts. To select a part, so as to
access its main parameters through the panel controls, press button [1] or [2]. When a part is selected, the
cont
rols’ led lights and the adjustable parameters are set according to the currently selected part.
Sound selector
Use this control to recall a sound belonging to the sound group (selected by the knob described at point
4). The display shows the digit corresponding to the selected sound (point 7) while the name of the sound
appears on the main panel display.
Sound display
Displays the sound selected through the knob described at point 6.
Generation parameter knobs.
These three knobs control three sound generation parameters. The parameter controlled by each knob
depends on the currently selected sound. For further information on the adjustable parameters see page
46 .
EXTERNAL module
The EXTERNAL module allows real-time control of
external MIDI devices connected to the instrument
through the MIDI or USB [TO HOST] connectors. Like
the sound generation modules, it can be activated /
deactivated and assigned to keyboard parts.
This module allows an easy access to the advanced
master keyboard functions of the instrument.
The module is comprised of two different, independent
parts, that can be recalled by pressing two buttons on
the panel. These two parts can both be active at the
same time and can be combined in layer or split modes.
Panel controls are further expanded by many other
parameters that can be modified through the
EDIT
PROGRAM menu (see External section , page 47 ) and
through the
Legend ’70s Editor
App.
Whether the module is present or not, all master keyboard functions of the instrument are still available, since
the External function is an integral part of
Legend '70s . Without the dedicated module, all the functions
connected to the control of external devices can be accessed through the EDIT PROGRAM menu.
MIDI parameter knob.
Use this knob to select a MIDI parameter, so as to send it out or adjust it through the knob at point 6.
Parameter Description
Port MIDI message transmission port
Channel MIDI message transmission channel
LSB Bank Bank Select LSB message transmission
MSB Bank Bank Select MSB message transmission
Prg Change Program Change message transmission
Ctrl 1 CC Control Change 1 assigned to the [CTRL 1] knob
Ctrl 2 CC Control Change 2 assigned to the [CTRL 2] knob
Ctrl 3 CC Control Change 3 assigned to the [CTRL 3] knob
5
NB
A blinking light on buttons [1] or [2] indicates that the part, though not currently selected, is active.
6
7
8
NOTE
Further information on the controls described at points 1, 2 and 3 can be found on page 11 . The Led lights described at
point 3 are not available, since this module is not a sound generation module and, as such, it does not have [FX1] or
[FX2].
4
1
2
3
4
5
6
7
8