Viscount Chorale 8, User Manual

Page: 40 / 44

38
Viscount
Chorale 8 Owner’s Manual
10.3 UPGRADING THE OPERATING SYSTEM
Upgrading the organ’s operating system requires use of a MIDI file (extension .MID) reader, by means of
which the data in the upgrade file can be transmitted to the organ. A hardware device used for MIDI
sequencing, or a computer software package capable of processing this type of file, may be used. Connect
the MIDI data output port of the transmitter device (which may be the MIDI OUT connector of a hardware
module or of a serial or USB / MIDI interface or Joyport if a computer is used) to the [MIDI IN] connector
of the
Chorale 8 .
Start the updating procedure; when the organ starts to receive the data, the display will show :
now the display will start to show a percentage of the data received.
At the end of the procedure, the following video page is displayed:
When the organ is switched on, if the display shows one of the following video page:
If the display looks like the one shown on the left, you must turn the organ off and switch it back on whilst holding
down the [FIELD
S
], [FIELD
T
] and [EXIT] buttons at the same time. You can then repeat the updating
procedure. If the display looks like the one shown on the right it is possible to re-transmit the MIDI files straight
away without having to manually recall the updating procedure.