background image

plug’n’dose TP

operating and maintenance instructions

10 / 11

 Version 1.3

Copyright ©

8

Disposal  

9

EC-Declaration of Conformity  

n accordance with the EC-Machinery Directive 2006/42/EG, Appendix II A

We, 

hereby declare that the machinery described below complies in its design and
construction and in the version marketed by us with the basic safety and health
requirements of the EC Directive 2006/42/EG.

Dispose of the control unit in an environmentally safe way. All materials and 

products left in containers must be treated in accordance with the appropriate 

recycling requirements.
Electrical components must not be disposed of together with household waste. 

They must be taken to the collection points provided for this purpose.
2002/96/EC (WEEE) EC Directive on waste electrical and electronic equipment.
This unit complies with RoHS requirements.

ViscoTec Pumpen- und Dosiertechnik GmbH
Amperstraße 13
D-84513 Töging          

Product description
Function

Dosing system with dispenser

Model

plug´n´dose TP  with dispenser

eco-PEN300 / 450 / 600 / 700

Harmonised standards applied
DIN EN ISO 12100:2011-03

Safety of machinery

DIN EN 809:2011-01

Pumps and Pump Units for Liquids (Common safety 

requirements)

DIN EN ISO 13857:2008-06

Safety of machinery - Safety distances

DIN EN 61000-6-3:2011-09

Electromagnetic compatibility

DIN EN 61000-6-2:2011-06

Electromagnetic compatibility, Immunity

Töging, 12.01.2012

Georg Senftl

Managing Director and Person authorised to collect the technical

documents (address see above)

Summary of Contents for PreeFlow plug'n'dose TP













Reviews: