ViscoTec Preeflow eco-PEN700 3D, Operation & Maintenance Manual

Page: 2 / 32

TABLE OF CONTENTS
2 / 32 INST-002756 / A eco-PEN700 3D
1 Introduction ...................................................................................................... 4
1.1 Delivery package ..................................................................................... 4
1.2 Incoming inspection ................................................................................. 5
2 Safety ................................................................................................................ 6
2.1 Explanation of symbols used ................................................................... 6
2.2 Intended use ............................................................................................ 7
2.3 Personnel................................................................................................. 8
2.3.1 Operators..................................................................................... 8
2.3.2 Maintenance staff ........................................................................ 8
2.4 Informal safety precautions...................................................................... 8
2.5 Preventing damage to equipment............................................................ 9
2.6 Organisational safety measures .............................................................. 9
2.7 Residual risks......................................................................................... 10
2.8 Transport and storage............................................................................ 11
3 Product description ....................................................................................... 12
4 Operation ........................................................................................................ 12
4.1 Initial commissioning.............................................................................. 12
4.1.1 Fitting the stator ......................................................................... 13
4.1.2 Connecting the dosing unit to the drive unit............................... 13
4.1.3 Feeding material and bleeding the dispenser for the first time.. 14
4.1.4 Calibration.................................................................................. 16
4.2 Switching on, starting dosing process.................................................... 16
4.3 Switching off, ending dosing process..................................................... 16
4.4 Decommissioning................................................................................... 17
4.5 Re-commissioning ................................................................................. 17