13 / 36
4
Operation
4.1
Initial commissioning
All activities described below may only be carried out by qualified staff.
When delivered, the stator is not installed so as to avoid bearing damage to the elastomer of
the stator.
4.1.1
Dismantling the dispenser
Unscrew clamping sleeve (26) with combination tool (42).
Remove the 2 screws (24).
Remove locking plate (23) and flat gasket (22).
Remove the 4 screws (13).
Remove bearing housing for mixer (14).
13
14
26
24
23
22
S12
34
5
S12345
42
Fig. 2
