flowscreen
Operating Instructions
Copyright ©
Version 1.0
19 / 24
3.8
Software update (firmware)
General
The current version number can be read out via <
Settings
> in the lower-right corner of
the display.
Uploading the update
• Switch off flowscreen.
• Connect flowscreen to a PC (USB cable with
2x A-plug).
• Run the program microBootloader USB
HID.exe on the PC.
• Switch on flowscreen.
• The connection between the PC and
flowscreen is established when the USB
logo (1) turns red
1
<
Connect
> (2)
►
<
Connect
> changes to <
Disconnect
>.
• <
Browse for Hex
> and select the firmware file.
• <
Begin Uploading
>, to upload the update. The flowscreen analysis system is
automatically restarted after the successful update.
• Switch off flowscreen and disconnect it from the PC. flowscreen is now ready for
operation again.
1.Only for approx. two seconds
1
2
3 4
Fig. 8
Summary of Contents for flowscreen
Page 1: ...Operating Instructions flowscreen ...
Page 2: ......
