Visco VSC-37V3, Operating Instructions Manual

Page: 17 / 61

14
Aspect ratio setup
Press ASPECT key on the remote control to enter Scaling submenu, there are four options for you to
select: Auto, 4:3, 16:9, Zoom. Use p / q arrow key to move the cursor to the option you desired and
press OK key to confirm.
If Scaling is not set to Auto, you should select Scaling mode depending on current program aspect
ratio.
Auto Search
1. Press MENU key on the remote control to enter the main menu, use
p
/
q
key to select TV
Channel and press OK or
u
key to enter TV Channel submenu. Press
p
/
q
key to move the
cursor to Auto Search, then press OK or u key to enter Auto Search submenu, the following OSD
will be displayed on the screen.
2. Use
p
/
q
key to move the cursor to Source, there are three options for you to select: Antenna,
Cable and Cable, press p / q key to move the cursor to the source you need, press OK
key to confirm. If you have selected Cable or Cable, three options will be displayed
under Cable: STD, HRC and IRC. Press arrow keys to move the cursor to the option you
desired, then press OK key to confirm.
3. Use
p
/
q
key to move the cursor to OK option, then press OK key on the remote control to start
searching. If you want to stop searching, just press EXIT key or move the cursor to Cancel option
and press OK.
Menu operation
Scaling
Auto
4:3
16:9
Zoom
Video
Audio
TV Channel
Closed Caption
Time Setup
System Setup
Auto Search
Source
Antenna
Cable
Manual Search
Channel Edit
Info
: MOVE,
ENTER: SELECT, EXIT: PREVIOUS,
?
A Cable
STD HRC IRC
Ok
Cancel
Cable Tuner: Search physical channel 6, 0 found.