manualshive.com logo in svg

Visara CNA-8000, Users Manual And Maintenance Manual

Share
Download
Visara CNA-8000 Users Manual And Maintenance Manual Download Page 119

CNA-8000 Users Guide and Maintenance Manual 

707157-001  

8-15 

 

Replacing System Cooling Fans 

Installing a new fan: (3 each 9.2 cm. Fans) 

Replace the failed fan with an identical 9.2-cm, 12 volt fan (Visara p/n 
53925-002).  

1.  Position the new fan at its proper place in the chassis by fitting the 

fan with its housing onto the fan mounts in the chassis.  

2.  A “click” can be heard if the fan (in its housing) is properly 

installed. If the system power is on, the hot-pluggable fan feature 
will cause the fan to start immediately upon being connected to its 
header on the motherboard. 

Installing a new fan: (2 each 8 cm. Fans) 

Replace the failed fan with an identical 8-cm, 12 volt fan (Visara p/n 
53925-001).  

1.  Position the new fan at its proper place in the chassis by fitting the 

fan with its housing onto the fan mounts in the chassis.  

2.  A “click” can be heard if the fan (in its housing) is properly 

installed. If the system power is on, the hot-pluggable fan feature 
will cause the fan to start immediately upon being connected to its 
header on the motherboard. 

 

 

Summary of Contents for CNA-8000



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands