ViSAGE VIS0495.1, User Manual

Page: 4 / 6

Visage Lighting & Effects www.visage-lighting.co.uk

secure installation to ensure the device does not swing freely

the use of safety rope at least 12 times the weight of the fixture

A maximum drop distance never exceeding 20cm
FIRE SAFETY
Connection cables are as follows:
Cable Pin International
Brown Live L
Blue Neutral N
Yellow/Green Earth
INSTRUCTIONS FOR USE
DMX – 512 connection. Wires must not come into contact with each other. Only use a twin
screened shielded cable and 3-pin XLR plug and connector in order to connect the controller with
the fixture, or one fixture with another XLR connector.
DMX-input DMX-output
XLR mounting - socket XLR XLR mounting - socket:
1. Ground 1. Ground
2. Signal(-) 2. Signal(-)
3. ) 3. )
When using controllers with this device you can connect the DMX output of the controller directly
with the DMX input of the first fixture in the DMX chain.
Building a serial DMX chain. Connect the DMX output of the first fixture in the DMX chain with the
DMX input of the next fixture. Always connect one output with the input of the next fixture until all
fixtures are connected.
DMX MODE
6 Channel Mode
Channel Function Instruction
CH1
R Dimmer
Red Dimmer- 0-100%
CH2 G Dimmer Green Dimmer- 0-100%
CH3
B Dimmer Blue Dimmer- 0-100%
CH4 W Dimmer White Dimmer- 0-100%