4 of 6 pages
DOWN at the same time,you can initialize it at extra factory setting,running on the the first color jumping
mode,and the four digital tube displays"AJ-1".
DMX mode
DMX mode
DMX mode
DMX mode
You can control the devices individually via your DMX controller. The VIS0490/0491 is in slave mode in any
situation of DMX mode when it is combined to other VIS0490/0491, but not with a DMX-controller.
Addressing
The DMX control board allows you to assign the DMX address which is defined as the first channel
from which the VIS0490/0491 will respond to from the controller.
1.
Press MODE button until the display reads A.XXX
2.
Press UP or DOWN to set the DMX address.
You can set 510 pcs. at most when the
VIS0490/0491
it is in 4 channels DMX mode, 508 pcs. at most
when it is in 5 channels DMX mode, 507 pcs. at most when it is in 6 channels DMX mode,when it is in
7 channels DMX mode, 506 pcs. at most The LED display will flicker when there is no controller
signal.
DMX-PROTOCOL
The VIS0490/0491 can be controlled using 4, 5, 6 or 7 channels. The DMX address chart is on the
following pages.
Four Channels controls Red, Green,Blue and White.
Five channels controls Red, Green, Blue, White and Master Dimmer.
Six channels control Red, Green, Blue, White,Master Dimmer, and Strobe.
Seven channels control Red, Green, Blue, White,Master Dimmer, Strobe, and Macro (auto-effects).
1.
Press MODE button until the display reads CH-X
2.
Press UP or DOWN to set the number of desired DMX channels (4,5,6,7)