LED-HC 101
6-
address setting will be effect at once. Every time you turn the fixture on, it will be
ready to receive DMX signal or run the built-in programs.
C. Remote DMX address setting by CA-T DMX TESTER
The fixture can be set the DMX address remotely by CA-T
DMX TESTER
. Please
refer to the CA-T user manual to set the DMX address to the fixture.
D. Remote DMX address setting by universal DMX controller
Make sure the DMX cables of all units are connected.
Connect the first unit to a universal DMX controller.
Connect all units to the mains so they are switched on.
Set all DMX-channels on your DMX-controller to zero (value 000).
Set the DMX-channel, that you want to assign as DMX start address on you unit,
to maximum (value 255).
Press the
“Auto DMX address” button on the unit shortly.
If you want to set another unit to the same DMX start
address, simply press it’s
“Auto DMX address” button and it will receive the same address.
Done!
An example to make things clear:
