ViSAGE HB-850, User Manual, Page: 14 / 35

Operation
14
4. Attach the desired brush adapter to the hand piece 7 (see Fig. A and B).
5. Turn the locking ring to the left.
The brush adapter will audibly lock into place (see Fig. C).
You can now use the hot air brush.
Selecting a heat setting
The following table provides an overview of the possible heat settings.
Heat setting Property
Position
0
Off
Position 1 hot low airflow
Position
2
hot high airflow
Position C cold high airflow
Styling your hair
1. Make sure that the function switch 2 is set to the 0 position (see Fig. D).
2. Only connect the hot air brush to a properly installed socket.
3. Turn the function switch to the desired heat setting (see table in the chapter
section “Selecting a heat setting”).
4. Separate a strand of hair from the rest of your hair.
5. Place the hair tips on the brush adapter 5 or 6 (see Fig. A).
6. Push the “direction of rotation” switch 3 in the desired direction to wind
your strand of hair onto the brush adapter (see Fig. C).
7. Depending on the desired intensity, hold the wound up strand of hair on
the brush adapter for a brief moment.
8. If necessary, use the cold air function to fix your hair. To do so, turn the
function switch to position
C.
9. To unwind the strand of hair again, push the “direction of rotation” switch
in the opposite direction as you would when winding the strand of hair.
10. Repeat the process for all strands of hair.
11. To switch off the hot air brush, turn the function switch to the 0 position.
12. If you no longer wish to use the hot air brush, pull the power plug out of
the socket.
13. Let the hot air brush cool off completely.
14. Clean the hot air brush as described in the chapter “Cleaning”.
Korrektur
V2