11
Epilator
General information about using the epilator head on the Personal Groomer:
•
Select your desired speed.
0 = Power “OFF”
1 = Low Speed
2 = High Speed
•
Hold the unit in your palm at a 90° angle so the logo is facing you.
•
Position your Personal Groomer so that the discs are upright, the Personal Groomer should
be facing you.
•
To minimize discomfort, hold the skin taut surrounding the area you are removing hair from.
•
Gently glide the Personal Groomer in short, quick, brush-like, or sweeping strokes in the
direction of your hair growth. Note: for your protection, your Personal Groomer may slow
down or stop operating completely if it has been pressed too hard against the skin.
•
Before removing hair from the bikini line and underarms, it is important to use a loofah
sponge in warm water or bath to remove dead skin and prevent ingrown hairs. If it has
been an extended amount of time since you have removed hair from your bikini line and
underarms, trim the hair with a scissor or trimmer. Make sure to hold your skin taut with
one hand while removing hair.
•
Repeat within each area until all unwanted hair is removed. The time required to remove
unwanted hair varies from user to user.
•
After each use, it is recommended that you clean the epilator head.
Cleaning the Epilator Head:
1. Before cleaning, make sure to turn off and unplug the unit.
2. Push the release button, remove the epilator head.
3. Using the brush included, remove hair from all sides of the discs.
4. You can also rinse the epilator head (not the appliance) under the tap to clean it more thoroughly.
5. After it’s completely dry, replace the epilator head by gently pressing it until it clicks into place.
6. Replace the protective cap when not in use to safeguard the tweezers.
Epilator