Cleaning and maintenance
21
locking mechanism audibly engages (see
Fig. E
).
9. Place the protective cap
1
on the shaver.
The shaver is now ready for use again.
Daily cleaning after a wet shave
1. Use the On/Off switch
5
to turn off the shaver.
2. Before cleaning, pull the 5 V plug
8
out of the shaver.
3. Hold the shaver over the sink.
4. Depress both release buttons
4
to release the shaver
head
2
(see
Fig. D
).
5. Pull the shaver head up and off.
6. Wash the shaver head thoroughly under warm running
water on the inside and outside (see
Fig. F
).
7. Carefully dry the shaver head with a lint-free cloth or a pa-
per towel. In the process, do not push the shaving foils in.
8. Thoroughly rinse off the top part of the shaver and the
shaver blades under warm running water (see
Fig. G
).
9. Use the On/Off switch
5
to switch the shaver on without
the shaver head for approx. 5–10 seconds to dispel any
drops of water off of the shaver blades
3
.
10. Use a lint-free cloth or a paper towel to thoroughly dry off
the shaver.
11. Firmly mount the shaver head on the shaver until the lock-
ing mechanism audibly engages (see
Fig. E
).
12. Place the protective cap
1
on the shaver.
The shaver is now ready for use again.
Summary of Contents for 17113904
Page 4: ...4 C A B 7 8 9 13 11 12 10 1 2 3 4 5 6...
Page 5: ...5 E J K I H F G D 14 16 14 15...
Page 29: ......
Page 30: ......
