VISA SN-9100 Operating Instructions Manual Download Page 4

tion again repeat from b).

• To learn a new command on a button that has

already been memorized it is necessary to
first clear the memory (4.2)

4.2

) Cancellation procedures.

Cancellation procedures are used when wan-
ting to replace a learned command with
another learned command or restore a pre-
programmed command (See NOTE above).

4.2.A

) Cancellation of only one button.

a) Press and release the «

» button.

b) Enter the code «

6 6 6 6

».

c) Press the button to be cleared and watch the

LED that will confirm cancellation with 2
short flashes.

d) To cancel more commands repeat from a).
N.B.: Exit from cancellation mode is automatic
after approx.

8

seconds of the last operation.

4.2.B

)Total cancellation (on all buttons of both

memory banks).

a) Press and release the «

» button.

b) Enter the code «

7 7 7 7

» and watch the LED

that will confirm cancellation with two
short flashes.

5)

“WHAT TO DO IF…”

- After the batteries have been inserted, the

LED will not flash when pressing the
«

» button?

Check that the batteries have been inserted with
correct polarity.

- The automatic search was unsuccessful?

Repeat the operation and observe the LED
After a while you will notice that the LED emits 5
short flashes indicating the end of a search cycle.
Keep the search button pressed…if your
machine still does not respond and the LED
again emits 5 short flashes, abandon this proce-
dure and try inserting manually, one by
one, following the procedures in the pre-
vious chapters, all the codes listed in the
tables 
(Tab. A  for TVs,Tab. C. for VCRs).

- You have some difficulties with the learning

function?
Try repositioning the two remote controls chan-
ging the distance and/or alignment.

- After a while the operation of the remote

control becomes erratic?
Make a note of the codes memorized (see also
para.

3

) and quickly change the batteries. If no

change, press (for example with the tip of a pen-
cil or non sharp object) the internal reset button.
Take notice: after pressing the RESET but-
ton it is necessary to enter again all the requi-
red codes.

CODE

?

CODE

?

CODE

?

4

SONY

1001 - 1002 - 1003 - 1004
1005 - 1006 - 1007 - 1008

PANASONIC

1009 - 1010 - 1011 - 1012
1013

SAMSUNG

1014 - 1015 - 1016 - 1017
1018 - 1019 - 1020 - 1021
1022 - 1023 - 1023 - 1024
1025 - 1026 - 1027 - 1028

TAB. A: 

CODES OF TV

TAB. B

ORIGINAL SONY MODELS 

CODE

1 465 487 11 - 1 465 488 11 - A 1009801 A - A 1009840 A - A 1009866 A - A 1009875 A - A 1470708 A - A 1470716 A -

1001

A 1470726 A - A 1470735 A - A 1470738 A - A 1470742 A - A 1470744 A - A 1470745 A - A 1470747 A - A 1470760 A - 
A 1470779 A - A 1470791 A - A 1470794 A - A 1470806 A - A 1470808 A - A 1470811 A - A 1470813 A - A 1470816 A -
A 1470818 A - A 1470839 A - A 1470844 A - A 1470858 A - A 1470876 A - RM (VIDEO 8) - RM 640 - RM 641 A - 
RM 642 A - RM 644 - RM 646 - RM 649 - RM 650 - RM 651 - RM 652 - RM 653 - RM 654 - RM 655 - RM 657 - 
RM 658 - RM 661 - RM 661 A - RM 662 - RM 663 - RM 664 - RM 665 - RM 668 - RM 670 - RM 671 - RM 672 - 
RM 673 - RM 674 -RM 676 - RM 677 A - RM 687 - RM 687 B - RM 827 B - RM 849 T 

1465 13411 - 1465 136311 - 1465 79611 - 1465 79621 - 1465 79711 -  1693 14122 - 9196 345 0 - A 1470681 A - 

1002 

A 1470704 A - A 1470712 A - A 1470727 A - A 1470728 A - A 1470741 A - A 1470802 A - A 1470847 A - A 1470859 A - 
A 1470881 A - RM 669 - RM 677 C - RM 688 - RM 689 - RM 694 - RM 698 - RM 717 A - RM 724 - RM 816 -  RM 817 - 
RM 818 - RM 821 - RM 826 - RM 827 S - RM 828 - RM 845 T - RM 849 S - RMK 1T

RM 637 C - RM 830 - RM 831 -  RM 832 - RM 833 - RM 834 - RM 836 - RM 838 - RM 839 -  RM 842 - RM 846 - 

1003

RM 860 - RM 862 - RM 863 -  RMV 242

A 1009093 A - A 1009094 A - A 1009098 A -  A 1009194 A - A 1009604 A - A 1009614 A - A 1009756 A -  A 1009765 A -

1004

A 1470562 A - A 1470588 A - A 1470591 A - A 1470594 A -  A 1470615 A - A 1470625 A - A 1470631 A -  A 1470634 A - 
A 1470640 A - A 1470648 A - A 1470672 A - A 1470759 A - RM 105 - RM 610 - RM 611 - RM 613 - RM 613 S - 
RM 613 ST - RM 614 - RM 615 P - RM 620 - RM 621 - RM 622 - RM 623 - RM 624 - RM 625 - RM 630 - RM 631 - 
RM 632 - RM 633 - RM 634 - RM 635 - RM 636 - RM 637 - RMT 211 - X 43578551 - X 43716151

N.E. SN 9100 (GB)  13-07-2000 12:33  Pagina 4

Summary of Contents for SN-9100









Reviews: