FLAT HEAD
SCREW (2)
ACRYLIC LENS
END BRACKET
END KNOB
MOUNTING BRACKET
AUXILIARY
HOLE (2)
MOUNTING SCREW (2)
FLR
Mounting instructions:
Fasten mounting bracket over junction box (by others) to the wall with mounting
1.
screws supplied or ones suitiable for wall construction, through mounting holes.
Make electrical connections per local and national codes.
2.
Put fixture over mounting bracket and fasten with (2) button head screws provided.
3.
Note: Auxiliary mounting holes are to be used for 3' and 4' length fixtures.
Lamp installation instructions:
Unscrew end knob from one end.
1.
Slide off end bracket.
2.
Squeeze acrylic lens and slide out.
3.
Install lamp.
4.
Drawing:
760456XX
Rev:
B
Sheet:
2 of 3
Eng:
GJW
Date Drawn:
11/5/2003
INSTALLATION INSTRUCTIONS
Model:
CB6504, CB6505, CB6506, CB6507, CB6508, CB6509
Fixture Family:
ASTA
1717 West Civic Drive Milwaukee, WI 53209
414-354-6600
Design Modification Rights Reserved
© Visa Lighting
!
When using electrical equipment, basic safety precautions should always be followed, including the following:
Read all instructions carefully before installing and save for future use.
•
Make sure all connections are in accordance with the National Electrical Code and local regulations.
•
To avoid possible electric shock, be sure the power supply is turned off before servicing or installing the fixture
•
Service should be performed by qualified personnel.
•
These instructions may not cover all details or variations. If additional information is needed, please contact Visa Lighting.
•
Document Description: Installation Instructions for ASTA
ASTA Series Luminaires
