7
E N G L I S H
ORBITAL SANDER LR84H/LRE84H/LRT84H
Important
Read these OPERATING INSTRUCTIONS and
the attached GENERAL SAFETY INSTRUC-
TIONS LEAFLET carefully before using the
machine. Make sure you have understood
them before operating the machine for
the first time.
Keep both sets of instructions for any
future queries.
1. TECHNICAL DATA
MODEL LR84H
Machine Type..................................ORBITAL SANDER
Universal Motor...............................................50-60 Hz
Power..................................................................180 W
No-load speed...........................................12500 min
-1
Stroks.................................................................25000
Orbit diameter.......................................................2 mm
Sanding surface..........................................130x80 mm
Weight................................................................1.5 Kg
Weighted equivalent continuous
acoustic pressure level A..................................................77 dBA
Uncertainty...................................................................K = 3 dbA
Wear ear protection!
Vibration total values.................................................a
h
: 3.6 m/s
2
Uncertainty....................................................................K: 1.5 m/s
2
MODEL LRE84H
Machine Type..........ELECTRONIC ORBITAL SANDER
Universal Motor...............................................50-60 Hz
Power..................................................................180 W
Adjustable speed..............................7000-12500 min
-1
Stroks......................................................14000-25000
Orbit diameter......................................................2 mm
Sanding surface.........................................130x80 mm
Weight................................................................1.5 Kg
Weighted equivalent continuous
acoustic pressure level A..................................................77 dBA
Uncertainty...................................................................K = 3 dbA
Wear ear protection!
Vibration total values.................................................a
h
: 3.6 m/s
2
Uncertainty....................................................................K: 1.5 m/s
2
MODEL LRT84H
Machine Type..............ELECTRONIC ORBITAL AND
ROTARYORBITAL SANDER
Universal Motor...............................................50-60 Hz
Power..................................................................180 W
Adjustable speed..............................7000-12500 min
-1
Stroks......................................................14000-25000
Orbit diameter.......................................................2 mm
Sanding surface..........................................130x80 mm
Abrasive disk diameter.......................................125 mm
Weight................................................................1.5 Kg
Weighted equivalent continuous
acoustic pressure level A..................................................77 dBA
Uncertainty...................................................................K = 3 dbA
Wear ear protection!
Vibration total values.................................................a
h
: 3.8 m/s
2
Uncertainty....................................................................K: 1.5 m/s
2
2. USES
ORBITAL SANDING MACHINE: A single-handed sander for
dry surface finishing. Equipped with forced suctioning
of sanding dust.
To obtain a good quality finish, slide the machine over the
surface to be worked in repetitive elliptical movements
to avoid the formation of grooves on the sanded surface.
To achieve the desired finish, the surface should be sanded
several times using a finer grain of abrasive each time.
With the delta base 8445198 included with the machine,
even difficult to reach inside corners and slatted shutter
can easily be sanded.
The electronic speed adjustment feature included in
models LRE84H and LRT84H allows you to work at the
ideal speed for each abrasive and surface type. This is
particularly useful for sanding heat-sensitive materials
which require lower sanding speeds.
ROTARYORBITAL SANDER: The single-handed rotar-
yorbital sander combines two types of movement, one
rotational and the other orbital, enabling it to perform
planing and finish work very quickly. The smooth, sanded,
groove-free surfaces produced make it ideal for delicate
jobs and varnished wood.
Equipped with forced suctioning of sanding dust. The
double sander LRT84H is factory equipped with a velcro
base plate 8445498, which enables it to be converted
into a rotaryorbital sander.
The orbital sanders, LR84H and LRE84H, can also be
converted into rotaryorbital sanders by purchasing the
velcro base plate 8445498 as an accessory.
Models LRE84H and LRT84H are equipped with electronic
speed adjustment devices which allow you to work at
the ideal speed for each surface and abrasive type. This
is particularly useful for sanding heat-sensitive materials
which require lower sanding speeds.
3. STANDARD EQUIPMENT
Inside the box you will find the following:
