background image

15

Troubleshooting

Check the following list before reporting the problem.

Problem

Check

Solution

Product is not operating.

Check if there is power failure.  Make sure that the power is 

on before trying again. 

Check if the power plug is 
properly connected. 

Connect the power plug 
properly and try again. 

Check if the adapter is 
working properly.

Try another power 
receptacle. 

Check if the red light is 
blinking.

Unplug the adapter and 
contact Customer center. 

Strange odors permeate

 in the room during 

operation. 

Check if you are using the 
product in a place with smoke 
or other odor.

It can be less eff ective when 
the product is being used in 
a place with excessive odor 
or smoke. Ventilate the area 
before using the product. 

Check if there is dust or foreign 

Check if there is dust or foreign 

substances on the ion outlet. 

Clean the ion outlet and 
operate the product. 

Not sure if the product is 

operating.

Check if the light is on.

Press the [  ] button to turn 

on the product. 

There is no air coming out.  Check if the air fi lter is blocked 

with dust.

Clean the air fi lter if it is dirty. 

Noise is coming out from 

the product. 

Check if the ion outlet is 
blocked.

Remove any obstacles
blocking the ion outlet. 

SPi ケルタフキッスコチヲキホ ニ�ヘコ桒・IB_E(110420).indd   15

2011-04-20   ソタタ・9:43:30

Summary of Contents for SP-PA4 Series





















Reviews: