9
Installing the Product
Installing a wall mount type
(Preparations: Spirit level, pen or pencil, electric hammer drill,
hammer and driver)
1
After locating the bracket to be attached on a
wall, adjust it horizontally with a spirit level and
mark the positions of 6 bracket holes with a pen.
2
Make holes (diameter: 6.5 mm) on the marked
wall with an electric hammer drill.
3
After inserting anchor into the drilled holes, strike
them with a hammer to insert deeply and then
remove the ends of the anchor protruding from
the wall with a knife.
Wear protective equipment (gloves, safety glasses, etc.) for your safety.
4
Align the bracket holes on the wall where anchors are
anchors
anchors
inserted and secure the bracket with screws.
Electric
Hammer Drill
Anchor
SPi ｹﾙﾀﾌｷｯｽｺﾁｦｷﾎ ｽｺﾅﾄｵ衂・IB_E(110420).indd 9
2011-04-20 ｿﾀﾀ・9:40:50
