PART A: Basic machine
Shredder
L 60; L60+
©
VIRTUS EQUIPMENT 2018 All rights reserved
Page 13
4.4
Structural changes, spare parts, accessories
For reasons of safety, remodelling and/or modifications to the
machine, in particular to the electrical devices, are only
permissible by arrangement with the manufacturer!
Replace faulty parts immediately. Only use original spare parts or
spare parts from other manufacturers, which correspond to the
original spare parts with regards to function, stress and safety.
This applies in particular for reasons of EMC (electro-magnetic
compatibility) for electrical components.
The use of unsuitable parts can impair resistance to relays and
increase the emission of relays!
If parts are replaced which are relevant for safety, they must be
checked afterwards for proper function.
Only use accessories, which have been approved by the
manufacturer.
Use of accessories can change how the machine
works. You must therefore observe the additional advice for your
work and your safety. Read
Part B: Accessories
, before you
commission the machine.
4.5
Operation manuals from other manufacturers
Integrated in the machine are systems from other manufacturers.
When working on or with these systems, please observe the
advice in the operation manuals from the respective manufacturer.
These operation manuals are enclosed with the machine
documentation.
