Fasten the cadence sensor on the crank and make sure the app is opened
Select 'Settings', followed by 'BLE Settings'
Activate the sensor by pedaling
Select the sensor and wait for the notification 'successfully connected'
Wait for signal strength ('Good' at minimum) and battery % filled
In the app, select 'settings' again, followed by 'home'
1.
2.
3.
4.
5.
6.
Stap 3: BlueTooth connection
Stap 4: Select PraxFit - PraxSpin - PraxFilm
Troubleshooting
Make a choice and select a route / film
Start exercising, the route will appear
As soon as you stop exercising, the route pauses
Restart cycling, the locator appears, tab button 1 - 6 to jump to a different starting point
PraxFit
: based on rotations (RPM)
PraxSpin
: based on average speed
PraxFilm
: based on rotations with fixed speed
1.
2.
3.
4.
Check if the sensor is properly fastened on the trainer (picture 1)
Go to step 3 (BlueTooth connection), first deselect the sensor and select the sensor again
Check battery percentage in 'BLE settings'. In case you encounter '--%', reset the sensor
by removing the battery. Also replace the battery when the charge falls below 15%
Restart the Android TV box (off – on)
In case the problem is not solved: Chose PraxSpin and contact your dealer or mail to
[email protected]
1.
2.
3.
4.
5.
Copyright © Praxtour
