VirtuFit Wooden Plyo Box
2
EN
USER MANUAL
STEP 1
STEP 3
STEP 5
ASSEMBLY INSTRUCTIONS
STEP 2
STEP 4
STEP 6
Start by indentifying the bottom and placing the
finished side down. Connect one of the sides to the
base and install the one screw on the side that will
connect the two pieces. Provided you don’t start
moving the base, this should remind secure.
Repeat step 2 for the third side.
Fix all the screws with an electric screwdriver.
Install the second side by fitting in to the slot on
the base and the adjacent side. Install 2 screws,
one screw attaching to the piece at the floor and
the other screw at the center connecting the two
vertical side pieces. You will install the remaining
screws when all sides are assembled.
Install the fourth side with 3 screws. The center
screw on each side and the screw at the center
connecting this side to the bottom panel.
• Place the top on the structure and install all
screws on the top.
• Rotate the VirtuFit Wood Plyo Box and install
all remaining screws so that the sit flush with
the surface of the VirtuFit Wood Plyo Box.
24x
4x
