VIRTUFIT TR-90i, User Manual

Page: 15 / 30

EN
Virtufit Foldable TR-90i Treadmill
15
ALARM SIGNALS
This treadmill is designed in a way that in the event of an electrical fault, the machine will turn off
automatically to prevent any injuries to the user and to prevent damage to the machine (i.e. motor).
When the treadmill behaves erratically, simply reset the treadmill by turning the power switch off, waiting
for 1 minute then turning the power button back on.
E02 Over voltage protection of motor
• Make the machine self-checking again.
• Change controller.
E03 Over current protection
• Clean the dust between running board and belt, then put some oil.
• If the running belt wear seriously, please change the running belt.
E04 Motor open circuit
• Check the check the connect wire of motor ,if the connect wire loose, please connect it again.
• The motor carbon brush wear, replace carbon brush or motor.
E05
EEPROM damage or access problems change the controller board.
E06 Communication error
• Check the connect wire between computer and controller board, if it loose or broken, please connect
it again or change it.
• Change the incline motor.
E09 short-circuit protection
Change the controller board.
“---” Safety key not connected.
Insert the safety key.
No Power
• Check fuses (They are located on the controller under the motor cover).
• Check power outlet (Plug something else into the power outlet to ensure that the power outlet is
working correctly).
• Check Power Cable (You may need to take it to an electrician).
TROUBLE SHOOTING