VirtuFit iConsole Total Fit Ergometer Crosstrainer
7
EN
STEP 3
• Insert the Long axle (56) to the Handlebar post (4), then attach the Swing tube (7L/R) on the Long
axle (56) with the Hex socket screws (26), Spring washers (25), Flat washer (60),D-shape washers (24)
and Wave washers (21). Attention: Don’t lock them tightly now.
• Fix the Pedal support (8L/R) on the Crank (20) with Hex socket screw (26), Spring washer (25), Flat
washer (60),D-shape washer (24) and Wave washer (21). Attention: Don’t lock them tightly now.
• Connect the Swing tube (7L/R) and Pedal support (8L/R) together with the Screws (37), Flat washers
(38), Flat washers (30) and Nylon nuts (31). Then recheck and lock the above mentioned Hex screws
(26), Screws (37) and Nylon nuts (31) tightly.
• Lock the Pedal (34L/R) on the Pedal support (8L/R) tightly with the Hex screws (33), Flat washers (12)
as shown.
ASSEMBLY INSTRUCTIONS
