13
EN
VirtuFit Folding Bike with Tablet Holder
Display does not work
If the display no longer works, you can replace the batteries. These are at the back of the display.
Display shows no values
If the display does not show any values, you can try to check the sensor cables and the cables in the back
of the display. If this still does not work, you can move the sensor slightly.
Folding bike beeps
Check that all bolts and nuts are tightened securely. Spray silicone spray if necessary. Also check the wheels.
Squeaky exercise bike
First lubricate all rotating parts with silicone spray. It can also be that a screw is tightened too tightly or too
loosely, this creates friction and therefore a beep. If this is the case, try to find out exactly where the beep is
coming from and then loosen or tighten this screw. The screws should be tightened in such a way that they
can always be released by hand.
Ticking noise when pedaling
This is probably caused by one of the pedals. Disassemble the trapper (s) and then reattach them to the
device. Be careful, the left-hand trapper has to be turned counterclockwise to tighten, the right-hand
trapper clockwise. Tighten the pedals securely. If this does not offer the solution, report this to the supplier.
Heart rate display does not work
This can have various causes.
• The sensor cables running from the heart rate sensor to the display are incorrectly fitted or have come
off during use.
• It may be that the sensors have become damp, dirty or greasy, clean them regularly.
The console doesn’t work
• Are there any other problems? Please contact your dealer.
• When the display show Drawing D, it means the batteries need to be changed.
• If there is no signal when you pedal, please check if the cable is well connected.
Afbeelding A
Afbeelding B
Afbeelding C
Afbeelding D
TROUBLE SHOOTING
