EN
VirtuFit FDR 2.0i Ergometer Crosstrainer
6
STEP 1
14
13
35
14
13
29
40
35
29
1413
29
1413
29
36
35
35
#35 M8*73*20*H5 4PCS
#14 d8*¦ µ20*2*R30 4PCS
#13 d8 4PCS
#D S13-15 1PC
#29 M8*H16*S13
4PCS
61
S13
S15
Missing parts: If you think you are missing certain parts in your package, carefully check the styrofoa and
the device. Some parts (bolts, screws, etc.) are already attached to/in the device.
Error message: Ensure that all cables are carefully attached. The aluminum legs are very sensitive and
must remain straight. Do you receive an error message after mounting your device? Then you have to
straighten these aluminum legs again, this may cause the error message to disappear.
Socket screws: The device contains socket screws, make sure that the allen key is firmly in the
bolt before you apply force to the key. In this way you prevent the head of the socket head screw from
being rotated.
NOTE!
The transport wheels must be mounted on the front of the appliance.
• Remove the square neck bolt (35), spring washer (13), arc washer (14) and cap nut (29) from the
mainframe (61)first and then take off the paper tube.
• Fix the front and rear stabilizer (36)&(40) to the mainframe (61) with square neck bolt (35), spring
washer (13), arc washer (14) and cap nut (29) by cross solid wrench (D).
ASSEMBLY INSTRUCTIONS
