EN
VirtuFit Elite Smart Touch Treadmill
16
STEP 10
ASSEMBLY INSTRUCTIONS
• Use the Allen key 5 (B07) and loosen the M8 * 15 bolt to remove the f-module (G).
ATTENTION
• When using the treadmill, always go before the treadmill rolls on the rails stand. Once the tire rolls,
you can stand on the walking platform. In this way, the engine least loaded.
• After using the treadmill, turn off the power switch (on / off). In addition, do not use the emergency
stop unnecessary, only in an emergency. In this way, the circuit board is least loaded.
Remove the running board safety device.