Virtualfly SOLO Airliner, User Manual

Page: 8 / 38

______________ USER’S MANUAL SOLO Airliner_____________
From this moment we can already appreciate if the SOLO and the MFS / P3D / X-Plane computer are
communicating. In the
bellow part of the “SELECT PANEL TYPE” window you will see one of the following
messages.
•
Connected : Everything is ready, you can already begin to fly.
•
Searching … There is a communication failure between the MFS / P3D and the SOLO, look at
chapter 8 "troubleshooting".
If not get the connection after review chapter 8, please contact the VirtualFly Technical support:
"support@virtual-fly.com".
In this case the MFS and SOLO are connected
In this case the MFS and SFP are connected In this case the MFS and SOLO are not connected