VRBT200V must have built-in voice
recognition functionality.
1
With the VRBT200V in paired
and connected to your phone, press the
Multi-Function button once and you will
hear a short beep.
2
Repeat the name of a number
you have saved in your cell phone log.
As many voice tags as the cell phone
supports.
3
The call will proceed the same
as a regular call.
Call Waiting
If there is an incoming call while you
have a call in progress:
1
Press and hold the 3-Way
button to the right for 3 seconds to put
the current call on hold and answer the
waiting call.Note: To cancel the second
call and return to the “holding” call, press
the cancel button once.
2
Press and hold the 3-Way
button to the left for 3 seconds to cancel
the current call and answer waiting call.
Caller ID Display
The LCD will flash alternate screens
every 4 seconds when an incoming call
is not answered. On the first screen, the
first ten digits of the incoming call are
displayed, then the remaining digits will
be displayed on the second screen.
While speaking, screens alternate every
2 seconds. E.g. incoming or dialing
number 11112222333344 the first screen
displays as “1111222233” the second
screen displays as “3344”.
Call Log
1
Press the 3-Way button once to
enter the Call Log menu. The 3 Call Log
categories are: Missed Calls -> Dialed
Calls -> Received Calls in that order.
2
Move the 3-Way button to the
LEFT or RIGHT to navigate the three
logs.
3
Press the 3-Way button once to
enter the each log.
4
After you enter a Call Log,
move the 3Way button to the LEFT or
RIGHT to navigate through the phone
numbers.Press the Multi-Function Button
to call the highlighted phone number.
5
Press the Cancel Button to quit
the Call Log.
Call Log Display
Within the Call Logs, each number is
preceded by a single digit number (0-5)
and a space to designate the order of the
calls. “0” is the most recent number; “1”
is the next number and so on, up to
“5”.The first screen will show the first
eight digits of the logged number. E.g.
The number “7325551212” is displayed
as follows: First screen: “0 73255512”;
Second screen: “0 12”.
Reconnect to Cell
1.If the VRBT200V loses connection by
moving out of operating distance of the
paired cell phone, reconnect by moving it
within the operating area and press
Multi-Function button once to reconnect
to the cell phone.
2. If the VRBT200V is disconnected
because of being powered off, it will
connect automatically after powering on
again.
*
Note
: Please refer to the product user
manual from the manufacturer of your
cell phone for Voice Dialing & Redial
functionality and settings.
Specifications
