Photo Key chain
Photo Viewer Ver 2.4 CD
USB Cable
Charging The Battery
The battery will have a nominal charge from the factory. We recommend fully charging
the unit before use.
1. To charge the unit’s battery, insert the supplied USB cable into your computers USB
port, then insert the other end into the port on the side of the VKC140. The VKC140 will
display the photos that are stored on it while charging.
The battery takes about 3.5 hours to charge. The battery will last up to 5 hours on a single
charge.
2. After the battery is charged disconnect the unit.
3. Press the power button once to access the menu.
3. Use the Up & Down button to navigate the menu to Power OFF, then press the Power/
Select button once to shut the unit off.
Power OFF
Delete Image
Display Mode
Clock Set
Clock Display
Language
Exit
Fig. 1
Main Menu
Fig. 4
2007-08-07
14:21:07
Saturday
Auto Slide
Manual Slide
Fig. 2
GIVE US A CALL, WE'LL HELP YOU INSTALL.
1-800-445-1797
PLEASE DO NOT RETURN PRODUCT TO STORE.
Visit us on the WEB
www.vr-3.com
For Information and Technical Assistance,
Call Toll-Free in U.S.A. and Canada.
Computer
VKC140
The PhotoViewer browser is divided in half.
The computer’s window is on the left side, and
the VKC140’s window is on the right side.
Each Window has its own icons for performing
functions related to it.
If the VKC140 is disconnected from the com-
puter, then re-connected, the software must be
re-started.
PhotoViewer Browser
Auto Slide Time
05 Seconds
Fig. 3
USB Charge
USB Connect
Fig. 6
