5
Troubleshooting
If the Link Status LED
on the mimio wireless module is amber, a
wireless connection cannot be made between the mimio wireless
module and the wireless receiver. Please try the following steps to
establish a wireless connection:
1.
Ensure the PC is powered and turned on.
2.
Ensure the wireless module is plugged into an available USB port
on your PC.
3.
Ensure the mimio Xi capture bar is powered on and has a green
power LED. If the power LED is amber, replace the four AA
batteries in the mimio Xi capture bar.
4.
Move the mimio Xi with wireless module closer to the computer
with the wireless receiver connected to it.
If you still cannot establish a wireless connection after following the
four steps listed above, try unplugging the receiver USB cable from
the PC and then reinserting in the receiver USB cable into the PC. If
this does not help, then follow the steps outlined in the Learning
Process section to re-bind the wireless module and wireless receiver.
If completing the Learning Process does not result in a wireless
connection, please contact our Technical Support department using
one of the contact methods described in the Technical Support
section.
Note: Upon return from standby on some PC’s, the wireless link between the module and receiver cannot be
reestablished. In such cases, the receiver USB cable must be unplugged from the PC and reinserted to reestablish
the wireless connection.