virtual access GW2040 Series Configuring Download Page 3

Page: 3 / 34

1: About this document

Configuring a GSM (3G) modem on a GW2040 Series Router

Issue: 1.5

Page 3 of 34

About this document

1.1

Scope

This configuration guide explains how to set up and configure a primary link using the
GSM (3G) modem on a GW2040 Series router.

1.2

Readership

This document is for engineers who have previous experience configuring and managing
GW Series routers.

1.3

More information

1.3.1

Assigned interface number

Throughout this guide we have used ppp-2 as the assigned interface number. You can
configure any PPP interface number for connections. For example, ppp-1 could be
substituted for each ppp-2 task covered in this document.

1.3.2

References to GSM (3G)

The GW2040 web interface refers to GSM, not 3G, so screen grabs of the web interface
will vary.

1.4

Terminology

Abbreviation Description
APN

Access Point Name

GSM

Global System for Mobile communications

HSDPA

High-Speed Downlink Packet Access

UMTS

Universal Mobile Telecommunications System

EDGE

Enhanced Data rates for GSM Evolution

1.5

Prerequisites

1.5.1

Inserting the SIM card

Ensure the unit is powered off.

Hold the SIM card with the chip side facing down and the cut corner top left.

Gently push the SIM card into SIM slot 1 until it clicks in.

To remove the SIM card, gently push the SIM card. The card will click out.

WARNING

The SIM card MUST be inserted into the SMG before the unit is powered on.

Summary of Contents for GW2040 Series



































Search results

Summary of Contents for GW2040 Series

Reviews:

Related manuals for GW2040 Series

Brands by name

Popular brands

virtual access GW2040 Series, Configuring

Search results

Summary of Contents for GW2040 Series

Reviews:

Related manuals for GW2040 Series

Brands by name

Popular brands