5
ADJUSTABLE HANDLEBAR
Unlatch the handlebar clamp.
Latch the handlebar clamp to secure.
Press in the spring-loaded button.
Pull up or press down on the
handlebar until the spring-loaded
button locks in the desired position.
1
2
3
4
Unlatch the handlebar clamp. Use the
wrench to twist off the nuts from the
handle bar and remove the bolts and
handlebar covering.
Replace the covering over the handlebar,
and insert the bolts through the openings.
Place the nuts over the bolts and tighten
with the wrench. Latch the handlebar clamp.
3
Place the handlebar on top of the T bar
and align the openings. The throttle
should face inward and the brake
should face outward.
2
An adult must assemble the handlebars to the unit.
NOTE
1
THREE CONFIGURATIONS
TWO KICKSTANDS
LIGHTS
Position 1 - Folded
Position 2 - Bike
Position 3 - Scooter
Lights up when the unit is on.
Bike
Kickstand
Scooter
Kickstand
