5
4
OLED Display
How to Charge the Power
When the OLED displays the following symbol, it reminds you to
charge the power at once.
Pull out the wristband, then insert the device’s charging port into
the computer or charger’s USB port to finish the charging.
When the device is charging the power, the OLED will display as
the following picture. The power symbol blinks.
The OLED displays as the following picture, it means the
charging is complete.
Initial Start-Up
Overview
How to Turn on the MAX BUZZ for Your First Use
The MAX BUZZ is in the shipping mode when you open the box the first
time, so you have to plug it into a USB port or charger to wake the
device up. It will take about 3 seconds before it vibrates twice and show
“Hello!”, an then show the battery charging symbol. Now the MAX BUZZ
is activated, you can use it to start your measurement.
CAUTION
Batteries (battery pack or batteries installed) shall not be exposed
to excessive heat such as sunshine, fire or the like.
Steps
The Walking Distance(Default: mile)
The Consumed Calorie (kcal)
The Current Time (Default: 12 hours)
Monitoring Caller ID
Note:
(1) When the device is in the shipping mode, if you charge the
power, it will divert to the normal mode, then you can start your
measurement.
(2) When the shipping mode is removed, the MAX BUZZ will
display the initial time: 12:00 A.M..
(3) After pairing up with the mobile device, the MAX BUZZ will
download the time from the mobile device and it will display the
current time.
Alarm clock reminding
Hello !
CAUTION
The Mini USB port is only used for charging the power, but can
not be used for transmitting the data to the computer.
4:07
PM
171
1:12
AM
3.8
CAL
0.06
MI
12345678
