-EN-
7
USER GUIDE
Thank you for buying this Virax product and for the confidence you have shown in
our products.
This documentation has been produced with care so that you can make the best use
of the machine and in complete safety. We insist on the importance of reading this
instruction manual carefully before using the machine and keeping it next to the
machine. Due to modern mass production techniques, it is unlikely that your power
tool is faulty or that a part is missing. If you find anything wrong, do not operate the
tool until the parts have been replaced or the fault has been rectified. Failure to do
so could result in serious personal injury
Safety instructions
The Virax product may present certain dangers. It is therefore important that you respect the following
instructions in order to avoid injury or potentially serious lesions to yourself or others. The Virax product is
designed for professional use only and may only be used by competent people. The rules of the art in the
building and public works industry must always be respected.
General safety instructions
Important: Virax cannot be held responsible for any accidents that occur if the machine is used in any way
other than that for which it was designed.
1) Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Keep children and bystanders away while operating a power tool. Distractions can cause you to
lose control.
2) Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not
use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection.
c) Do not overreach. Keep proper footing and balance at all times.
d) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
3) Tool use and care
a) Do not force the tool. Use the correct tool for your application. The correct tool will do the job
better and safer at the rate for which it was designed.
b) Store idle tools out of the reach of children and do not allow persons unfamiliar with the tool or
these instructions to operate the tool. Tools are dangerous in the hands of untrained users.
c) Maintain tools. Check for misalignment or binding of moving parts, breakage of parts and any
other condition that may affect the tool’s operation. If damaged, have the tool repaired before use.
Many accidents are caused by poorly maintained tools.
d)
Use the tool in accordance with these instructions, taking into account the working conditions and
the work to be performed. Use of the power tool for operations different from those intended could
result in a hazardous situation.
e) Do not expose the tools to rain or humid conditions.
f) Have your tool maintained by an approved repair shop using original spare parts. Non observance
of this instruction may present a danger for the user and cancels the guarantee
Specific safety instructions
- Never use the product with a damaged hose or part. Never carry the product by the hose.
- Never exceed maximum pressure indicated on the pressure gauge, which would damage the product.
- Use only with clean water. Acid or corrosive liquids would damage the product.
Summary of Contents for 262005
Page 2: ...1 ...