E
LE
ct
R
i6ity
43
handled as a CC with the highest possible value of 127 within
ELECTRI6ITY.
12.5 VMT | Velocity Curve
You can change the characteristic of the
velocity curve for VMT articulations here. If you set the curve to ‘soft’ it
will be easier to play notes with a low velocity. If you set the curve to
‘hard’ it will be easier to play notes with a high velocity.
12.6 VMT | Velocity Curve | Retrigger
You can change the
characteristic of the velocity curve for VMT articulations if played with
the trigger keys here. If you set the curve to ‘soft’ it will be easier to play
notes with a low velocity. If you set the curve to ‘hard’ it will be easier to
play notes with a high velocity.
12.7 VMT | CC Curve
You can change the characteristic of the CC
response if controlling the velocity of a VMT articulation via CC here.
12.8 AMT | Velocity Curve
You can change the characteristic of the
velocity curve for AMT articulations here. Let’s take the ‘AMT Full’
articulation as an example: If you set the curve to ‘soft’ it will be easier
to play muted notes and you’ll need to hit the keys harder for open
notes. If you set the curve to ‘hard’ it will be easier to play open notes
and you’ll need to hit the softer to play muted notes. Play with these
settings until you get an response which fits your playing best.
12.9 AMT | Velocity Curve | Retrigger
You can change the
characteristic of the velocity curve for AMT articulations if played with
the trigger keys here. Let’s take the ‘AMT Full’ articulation as an
example: If you set the curve to ‘soft’ it will be easier to play muted
notes and you’ll need to hit the keys harder for open notes. If you set
the curve to ‘hard’ it will be easier to play open notes and you’ll need to
play the keys softer to play muted notes. Play with these settings until
you get an response which fits your playing best.
12.10 AMT | CC Curve
You can change the characteristic of the CC
response if controlling the velocity of a AMT articulation via CC here. If
you switch to ‘soft’ for example, it’s easier to control the lower range of
the morphing, while ‘hard’ gives you more control over the higher range.
12.11 VKS Switch Velocity
ELECTRI6ITY has keyswitches which reacts
to velocity. You can setup the velocity threshold of these velocity
keyswitches here. The default threshold is 90, which means that the
keyswitch switches if you play it with a velocity lower than 90 or equal
or higher than 90.
Summary of Contents for Electri6ity
Page 1: ...USER MANUAL...
Page 3: ...USER MANUAL...
Page 56: ...Electri6ity 51 Electri6ity Keyswitch List Default...
