Installation Manual of ViPRO Mobile DVR - MVR series │ver. 1.1
- 3 -
NOTICE
Before you install the MDVR system in the vehicle, please be familiar with this system and read this manual carefully.
Meanwhile the whole installation process must be guided by the professional persons.
1.
MDVR is electronic recording and storage system which must be delivered very carefully.
2.
Use only a regular 12-volt DC or 24-volt DC (3 ~ 5 Amps) certified power supply for installation in vehicles. The
MDVR can support wide power range from 8v ~36v DC. Please follow the installation and operating instructions
provided to ensure a steady and reliable installation. Handle all electric equipments and connections properly to avoid
injuries.
3.
Even though the recorder unit may not be turned on, live power exists in the mounting assembly and precautions
should be taken to avoid shock or short circuit.
4.
The MDVR installation and maintenance should be implemented by the person who is trained professionally.
5.
Choose the right place to install the recorder unit. The space must be big enough for ventilation. No any other
subjects around are allowed.
6.
Install the MDVR in a dry location shielded from direct contact with excessive humidity and moisture, rain or other
sources of liquid spills. Do not install on a recessed surface where liquids may accumulate or under surfaces where
liquids may drip.
7.
Do not handle the MDVR with wet hands, while standing in water, or while in contact with other sources of water or
moisture that could create a shock hazard.
8.
Install the MDVR out of direct sunlight and away from direct sources of heat, dust, vibration and high magnetic field
9.
MDVR and accessories installation must be insulated with vehicle to avoid loop interference
10.
Do not attach any external device (not recommended) to the recorder unit without specified or approved by Vendor.
11.
Attach the MDVR ground cable to the vehicle correctly to complete the power circuit.
12.
Do not mount the unit to a surface subject to excessive vibration.
13.
Do not take out or change any module when the MDVR is power on.
14. Power supply must connect to the vehicle battery positive and negative polarity directly or UPS from vehicle. Any
other indirect power connection is forbidden. In order to make sure the device and vehicle work fine, please add a
fuse into the connection for protection.
15.
Please do maintenance routine for MDVR and accessories to avoid any screw loose or bad video image.
