--
---
H3 (Erase Only): DIP SW 2 3 4 at ON position, DIP SW 1 at OFF position
3-1. Turn Rock Switch to
position (CD Duplicator). LED will show version
number.
3-2. Than LED display showing: from 00,11, 22, 33, ......88, 99
3-3. Duplicator will chk itself & get ready.
3-4. SmartDup ready, please insert your CD title into your CD-RW Media in
CD-RW Writer.
3-5. LED Display showing final counts down, than LED showing H3 or L3.
3-6. Start Erasing.
3-7. After Erased success, Buzzer will Beep & eject CD-RW media. LED
showing 00.
3-7-1. If fail, LED will showing: Er & eject CD-R Media, Buzzer will Beep also.
L3 (Erase Only): DIP SW 2 3 at ON position, DIP SW 1 4 at OFF position
This function for RW Media with Data inside, operation steps same as H3,
Erase speed drop to 4x only.
display firmware version number. (Buzzer 0.5s X1)
ex:
Power-On:
Only one segment is running and display "rd" (ready)
Self-Test:
After drives & discs ready in current mode, wait for
5 seconds. (Buzzer 0.2s X1)
ex:
Count Down:
or
Erasing:
After Self-Test or Test or Erase or Copy. (Buzzer 1sX2)
OK:
After Self-Test or Test or Erase or Copy or Upgrade. (Buzzer 0.2X3)
FAIL:
4
SmartDup VP-8220 Operation Manu
