7
OWNER’S MANUAL
EN
OPERATION
1. Press the ON/OFF button to turn on the front light.
2. Press twice to turn off the front light and turn on the light on the top.
3. Press for the third time to turn off the lamp.
HOW TO CHARGE
• Turn off the torch before charging.
• Plug micro USB plug of the USB cable to the micro USB port of the lamp.
Plug the other end to the AC charger or a compatible PC USB port.
Red LED indicator will be on during charging. When the battery is fully
charged, green LED is on. Disconnect the USB cable from the device and
power mains.
Note: The battery may get slightly warmer during charging. It’s normal
phenomena, and does not effect proper operation of the lamp.
MAINTENANCE
• Use a soft, damp cloth to clean the housing of the lamp.
• Do not use solvents or volatile chemicals to clean the lamp, as it may
damage the plastic parts of the product.
PRECAUTIONS
• Before charging, and when the product is not in use, turn the lamp off.
• Be careful not to damage the transparent light cover, and protect the
product from falling to the ground.
• Use only the charger supplied.
• Warranty does not cover mechanical damages. Decrease in battery’s
operating time does not fall under warranty’s regulation.
• Never cover the transparent light cover when the lamp is on. Never
point light directly at eyes. Let the torch cool down completely before
cleaning.
• Charge the unit before the first use.
• The efficiency may decrease if lantern is used or charged when
temperature is below 0˚C or above 40˚C.
• Make sure to handle and use this lamp according to above instructions.
• Keep the product away from water and other liquids.
• Any repair can be conducted only by qualified service.
Warning: To protect the battery life, please recharge the lantern whenever
the light goes dim.
