Viper LDK 7500 Technical Manual Download Page 30 | Manualshive

Page: 30 / 42

background image

4-4

Technical Manual LDK 7500 + LDK 5490 Adapter

Adjustments

3200K Adjustment

The following is an automatic internal calibration procedure to set the 3200K colour temperature.
a. Recall the standard factory file.
b. Shoot the white test chart illuminated with a 3200k spotlight (nominal video).
c. In the menu system select the Service menu.
d. Select Calibrations.
e. Select 3200K and run the procedure.

Sawtooth Calibration

The following is an automatic internal calibration procedure to adjust the internal gain of the DVP board.
(There are not pre-conditions for this calibration.)
a. In the menu system select the Service menu.
b. Select Calibrations.
c. Select Sawtooth and run the procedure.

Pre-processor Calibration

The following is an automatic internal calibration procedure to adjust the analogue-digital convertors.
(There are not pre-conditions for this calibration.)
a. In the menu system select the Service menu.
b. Select Calibrations.
c. Select PreProc and run the procedure.

Video ADC Automatic Calibration

The following is an automatic internal calibration procedure to adjust the analogue-digital convertors.
(There are not pre-conditions for this calibration.)
a. In the menu system select the Service menu.
b. Select Calibrations.
c. Select Video ADC and run the procedure.

«
...
28
29
30
31
32
...
»

Summary of Contents for LDK 7500











































Reviews:

No comments

Related manuals for LDK 7500

AGDVC60 - DIGITAL VIDEO CAMCORDER

Brand: Panasonic Pages: 13

Brand: Canon Pages: 56

Brand: Canon Pages: 110

Brand: Canon Pages: 13

Brand: Canon Pages: 116

Brand: Canon Pages: 226

ITC237-PW1A-IRZ

Brand: Dahua Pages: 20

Brand: SON Pages: 129

Brand: Sony Pages: 4

Brand: Sony Pages: 4

Brand: Sony Pages: 4

MVC-CD350 - Digital Still Camera Mavica Cd Recordable

Brand: Sony Pages: 2

Brand: Sony Pages: 8

Brand: Sony Pages: 2

Brand: Sony Pages: 3

Brand: Sony Pages: 12

Brand: Sony Pages: 35

Brand: Sony Pages: 44

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands