18
© 2012 Directed. All rights reserved.
Using the 1-Way Companion Remote
The companion 1 way remote commands the system features as
shown in the previous table, but without the message display of the
Responder LC3 remote. Parking light flashes is used to indicate that a
command has been received and activated as described in the
Basic
and
Advanced command
sections.
Accessing Commands
Similar to the Responder LC3 remote, Basic commands are performed
when a command button is pressed directly. To perform Advanced
Commands
press
the
AUX
button 1 to 4 times to access function levels,
AUX
x4 in the table for example implies pressing
AUX
4 times. The
LED flashes in groups for a few seconds to indicate the level.
Press
the desired command button while the LED is flashing to perform the
command.
Button Auto Lock
When On, the remote control buttons lock if more than 20 seconds
lapses between button presses. If a button is pressed when locked,
a fault tone is emitted. To unlock the buttons;
press
the
AUX
button fol-
lowed by the
AUX
AUX
button, the buttons unlock and tones play to confirm.
Programming
To enter;
hold
the
AUX
button for 8 seconds, the remote emits one long
beep and turns the LED on, the programming main menu has been
accessed.
