8
© 2012 Directed. All rights reserved.
Remote paging, 2-way
The system operates at 434 MHz and incorporates Directed’s propri-
etary out-board technology transceiver. The high frequency combined
with Binary Data communication achieves superior range with two-
way communication.
Signal paging features
A page is the signal the control module sends to the remote control as
confirmation of receipt of a command or alarm system status. When
the remote control receives a page it generates a page notification
to the user (notifications are audible beeps and-or vibration), and the
LCD icons display current system status.
Command Page
When a command (arm/disarm, or auxiliary channel) from the re-
mote control is sent and received, the system will send a command
page back to confirm receipt.
Alarm Page
If the alarm system is triggered while armed, an Alarm Page will be
sent to the remote control. When the remote receives an Alarm Page,
the LCD icons will display the alarm system status information and the
remote control will generate beeps and-or vibration.
An Alarm Page alert is a series of 5 groups of 4 rapid beeps (shock,
trunk, door, ignition, or hood trigger) and the LCD icon that caused
the alarm will display. The remote will beep and or vibrate every 60
seconds to alert the user that the alarm system was triggered and will
continue until the alarm page is cleared.
Summary of Contents for 3305V
Page 1: ......
