8
© 2013 Directed. All rights reserved.
ig ni tion key and know where the Valet button is located. Be sure to
check with the installer for the location and the number of presses of
the Valet button required to disarm the system.
To disarm the security system:
1. Turn the ignition to the ON position.
2. Press and release the Valet button the preset number of times
(one, the factory setting, to five times) within 15 seconds.
After five seconds the sys tem disarms. If the system does not dis-
arm, you may have waited too long.
Turn the ignition off and on and try again.
Location of Valet Button _________________________________
Number of Pulses _________________________________
The unit may respond to one to five pulses of the Valet button, when
disarming. Check with your installer to discuss how you want the
system configured.
Note
: as a precaution, if programmed for passive arming the system
should be placed into Valet Mode until a remote is available.
Silent mode
To temporarily turn off the arm or disarm chirps, use Silent Mode™.
Press
AUX
for less than one second before arming or disarming, and
the confirmation chirp(s) will be eliminated for that one op er a tion only.
If you want the arm/disarm chirps turned off permanently, your dealer
can do this for you.
The Warn Away response to lighter impacts is bypassed if the system
