Viper 280HF, Owner'S Manual

Page: 12 / 27

9
©
1999 Directed Electronics, Inc.
To disarm without a transmitter:
Turn on the ignition. Push the Valet ®
switch within 15 seconds. The sys-
tem should now disarm. If it does
not, you may have waited too long,
so turn the ignition off and on and
try again.
To temporarily turn off the arm or disarm chirps, use Silent Mode ™ .
Simply press briefly before arming or disarming, and the con-
firmation chirp(s) will be eliminated for that one operation only.
If you want the arm/disarm chirps turned off permanently, your
dealer can do this for you.
NOTE: The Warn Away® response to lighter impacts is bypassed if the
system is armed using Silent Mode ™ . This ensures that no chirps will be
emitted by the siren in an area you want chirp-free. The system is still
fully able to trigger. Only the Warn Away response is defeated.
If you are threatened in or near your vehicle, you can attract
attention by triggering the system with your transmitter! Just
press for 1.5 seconds, and you will enter Panic Mode. The
siren will sound and the parking lights will flash for 30 seconds.
To stop Panic Mode at any time, press on the transmitter
again.
Panic Mode
Silent Mode
DRW-35