VIPA System 200V IM Series, Manual

Page: 319 / 348

Manual VIPA System 200V
Chapter 8 Ethernet coupler
HB97E - IM - Rev. 06/29 8-15
Project engineering under WinNCS
The project engineering happens via WinNCS starting with V3.09. For
project engineering , the following preconditions should be met:
•
Recent VIPA2ETH.GSD is stored in WinNCS/GSD/Englisch.
For project engineering of the System 200V modules in WinNCS you
receive the features of the VIPA components with a GSD-file.
The GSD-file for the IM 253NET Ethernet coupler from VIPA is:
VIPA2ETH.GSD
Copy this GSD-file into WinNCS/GSD/Englisch.
The latest version is to find under ftp.vipa.de/support.
•
For online project engineering, the IM 253NET should be assembled
with the according modules, connected to the Ethernet and supplied
with voltage.
Attention!
For every Ethernet slave is delivered with the IP address 10.0.0.1, you
must not install more than one new Ethernet slave at a time!
•
Start WinNCS and create a new "Ethernet" project via
File
>
Create/Open project
.
→
A parameter windows for online search of "Slaves" and "Stations"
opens. [Slaves] lists all Ethernet coupler and [Stations] all CPs.
•
Click at [Slaves]
→
All Ethernet coupler are searched and listed with IP address and
where applicable with label.
•
Via double-click at a listed slave, this is overtaken into the network
window and listed with the concerning I/O periphery.
→
If there is no parameterization yet, the modules are listed as symbol
(without label).
•
Now you assign the according module type to the listed module symbol
in the parameter window and adjust the parameters when needed. The
address range that is occupied by the module in the TCP data stream is
automatically preset by the Ethernet coupler.
•
As soon as you click at [apply], you have to type the password. The
password request happens once per session and coupler. In delivery
state, the password is
00000000.
With correct password, the data is
transferred online to the Ethernet coupler. Repeat this for all listed
modules.
•
Save your project.
Preconditions
Approach
online project
engineering