Chapter 2 Deployment Touch Panel
Manual VIPA HMI
2-30
HB160E - TP - RE_605-1B1P0 - Rev. 10/16
Integration to WLAN network
By plugging a SDIO WLAN card there is the possibility to integrate your
Touch Panel to a WLAN network. For this driver for the corresponding
SDIO WLAN cards are pre-installed.
Please regard only SDIO WLAN cards are supported which drivers are pre-
installed in the Touch Panel. In the Touch Panel driver exist for the
following SDIO cards:
•
Socketcom P300
•
Spectec SDW821
•
JustMobile Wireless LAN Card.
•
PowerON the Touch Panel.
•
Plug the SDIO card
→
the SDIO card is identified and a dialog window,
which shows the available WLAN networks is opened.
Directly after installation a dialog window is shown. Here the available
WLAN networks are displayed.
Chose the corresponding network and click to [Connect].
At a safety-relevant network set the network parameters and enter the
network key. If the parameters are correct the connection is established.
If the Touch Panel should connect automatically to your WLAN network
after startup, so the automatically connection is to be activated.
For this open the register "Wireless Information" in the dialog window and
click to the [Advanced...] button.
Overview
WLAN via
SDIO card
Installation
WLAN integration
Automatically
connect to WLAN
Summary of Contents for HMI 605-1B1P0
