Manual VIPA System 200V
Chapter 6 CP 240 - M-Bus
HB97E - CP - Rev. 11/30
6-13
Example for M-Bus deployment
In the following example a M-Bus communication (send and receive) is
build-up. Furthermore the example shows how you may easily control the
communication processes by using the handling blocks.
At need you may receive the example project from VIPA.
For the example, the following components are required:
1 System 200V consisting of CPU 21x and CP 240 M-Bus
1 acquisition device with M-Bus interface
Project engineering tool SIMATIC Manager from Siemens with transfer
cable
Build-up the System 200V.
Load the example project, adjust the periphery address if necessary and
transfer the project to the CPU.
Follow these steps in the Siemens SIMATIC Manager:
•
Start the Siemens SIMATIC Manager.
•
To extract the file MBUS.zip select
File
>
de-archive
.
•
Choose the example file MBUS.zip and set "s7proj" as destination
directory.
•
Open the extracted project.
The project already contains the PLC application and the hardware
configuration and has the following structure:
Overview
Requirements
Approach
Dearchive the
project
Project structure
Summary of Contents for CP 240 RS232
