Chapter 2 Deployment Touch Panel
Manual VIPA HMI
2-14
HB160E - TP - RE_608-1BC40 - Rev. 08/13
If your Touch Panel shall be available via Ethernet you have to install a
partnership for
USB communication
first like shown above. Afterwards you
may configure a
partnership for Ethernet communication
after the following
approach:
•
To enable the Touch Panel to be accessed via Ethernet you have to
activate the option "enable network connection" in ActiveSync via
File
>
Connection Settings
:
•
Disconnect the USB cable of the Touch Panel.
•
Confirm the message that the device could not be found.
•
Start the communication program required for ActiveSync at the Touch
Panel via
START
>
Programs
>
Communication
>
Act.Sync Netw
and
click on [Connect].
Now you may access the Touch Panel with ActiveSync via Ethernet.
Note!
To keep the settings also after power on, you have to store them to the
registry with
START
>
Programs
>
KuK Tools
>
Save.
Install partnership
via Ethernet
