Chapter 1 Hardware description
Manual VIPA HMI
1-10
HB160E - TP - RE_606-1BC40 - Rev. 08/13
Dimensions
installation width
in
s
tal
la
ti
on hi
ght
installation
depth
width
he
ig
ht
For the installation of the Touch Panel in control cabinets and desks the
following dimensions are necessary:
Installation cutting (W x H)
200 x 144mm
Front panel (W x H)
212 x 156mm
Installation depth
37mm
Note!
The degrees of protection are only guaranteed when the following is
observed:
•
Material thickness at the mounting cut-out: 2 ... 5mm
•
the deviation from the plane for the panel cut-out is
≤
0.5mm. This
condition must be fulfilled for the mounted HMI device
•
Permissible surface roughness in the area of the seal:
≤
120µm (friction
coefficient 120)
Installation
dimensions
6.5''
606-1BC40
